HOME   |   CONTACT US   |   KOREAN
PRODUCT Info.
 
 
 

HOME > PRODUCT > Data Acquisition

  USB-EK01
USB Full Speed Development Board
 

   - USB Protocol Test and Development
   - 8051 Program Test and Development
   - USB device driver Test and Development
   - Step by Step Debugging Practice
   - Supports Full speed(12Mbps) USB
   - Using enhanced 8051 microcontroller core
   - Friendly Interface USB SIE(Serial Interface Engine)
   - Step by Step Debugging and 8051 Compile (Code size limited 4K)
   - Power via the USB cable(Max. 500mA)

 



 

PRODUCT INFORMATION

Introduction
The USB-EK01 is a board that can do a test or development of USB protocol, 8051 program, USB device driver. It is the board which it was made through USB so as to be able to test various application.


Application
USB Keypad, Timer, Electric Bullet Board, Jog-shuttle, Voltmeter
USB Data Acquisition(Temperature/Huminity/Voltage/Current)
USB I/O Control
USB Remocon(Home appliance control by PC
USB Programmer(Serial Flash, ROM, EEPROM erc.)


Specification
General

- USB1.1 Device Specification
- Full Speed (12Mbps) Device
- +5V Single Power Operation
- Power through USB B type Connector(Max. 500mA)

Function

- 8051 Compatible Instruction Set, 4 Clock per Cycle
- 8K SRAM for Code and Data
- 32 General Purpose I/O
- Extension Connection for Various Application
- Using Two RS232 interface (Max. : 115200bps) for debugging or special purpose
- Board reset and firmware program load with using USB board
- The convenient device development which used Cypress의 Development Kit
- Usable evaluation Keil Compiler and Debugger (4K code limiy)

Physical
Specification

- Connector : Various Connector for Application
- Operating Temperature : 0 ~ 60℃
- Storage Temperature : -20 ~ 80℃
- Relative Humidity : 5 to 95% non-condensing
- Dimension (not including connector) : 89mm x 66mm

Software Support
OS Information - Windows 2000/XP/7
- 32bit Driver
Software Compatibility - Various Firmware Spurce